Boot Settings Configuration - Asus E3746 Hardware User Manual

4.7.5

Boot Settings Configuration

Main Extreme Tweaker
Boot Settings Configuration
Case Open Warning
Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Typematic Rate Setting
x Typematic Rate (Chars/Sec) 6
x Typematic Delay (Msec)
OS Select For DRAM > 64MB [Non-OS2]
Full Screen LOGO
BIOS Wallpaper
Halt On
F1:Help ↑↓ : Select Item
ESC: Exit →←: Select Menu
Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the
chassis open status. Refer to section "2.8.2 Internal connectors" for setting details.
Configuration options: [Disabled] [Enabled]
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When Enabled, the
system skips certain tests while booting.
Configuration options: [Disabled] [Enabled]
Boot Up Floppy Seek [Disabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the
chassis open status. Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic Rate Setting [Disabled]
Allows you to set the keystroke rate. Enable this item to configure the Typematic
Rate (Chars/Sec) and the Typematic Delay (Msec).
Configuration options: [Disabled] [Enabled]
The following two items Typematic Rate (Chars/Sec) and Typematic Delay
(Msec) become configurable when the Typematic Rate Setting is enabled.
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which a character repeats when you hold a key.
Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
ROG Striker II Extreme / Striker II NSE
Phoenix-AwardBIOS CMOS Setup Utility
Advanced Power
[Enabled]
[Enabled]
[Disabled]
[On]
[Disabled]
250
[Enabled]
[00%]
[All Errors]
-/+: Change Value
Enter: Select SubMenu
Boot Tools Exit
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
F5: Setup Defaults
F10: Save and Exit
4-39