Chipset - Asus DELUXE P5LD2 User Manual

4.4.5 4.4.5 4.4.5 4.4.5 4.4.5

Chipset

Chipset Chipset Chipset Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
Configure DRAM Timing by SPD
Hyper Path 3
Boot Graphic Adapter Priority
Internal Graphics Mode Select
PEG Buffer Length
Link Latency
PEG Root Control
PEG Link Mode
Slot Power
High Priority Port Select
2nd PCI-E slot mode
Advanced Chipset Settings Advanced Chipset Settings Advanced Chipset Settings
Advanced Chipset Settings Advanced Chipset Settings
Configure DRAM Timing by SPD [Enabled] Configure DRAM Timing by SPD [Enabled]
Configure DRAM Timing by SPD [Enabled] Configure DRAM Timing by SPD [Enabled] Configure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according
to the DRAM SPD (Serial Presence Detect). When disabled, you can
manually set the DRAM timing parameters through the DRAM sub-items.
The following sub-items appear when this item is Disabled.
Configuration options: [Disabled] [Enabled]
DRAM CAS# Latency [5 Clocks]
Controls the latency between the SDRAM read command and the time
the data actually becomes available.
Configuration options: [6 Clocks] [5 Clocks] [4 Clocks] [3 Clocks]
DRAM RAS# Precharge [4 Clocks]
Controls the idle clocks after issuing a precharge command to the DDR
SDRAM. Configuration options: [2 Clocks] [3 Clocks] [4 Clocks]
[5 Clocks] [6 Clocks]
DRAM RAS# to CAS# Delay [4 Clocks]
Controls the latency between the DDR SDRAM active command and
the read/write command. Configuration options: [2 Clocks] [3 Clocks]
[4 Clocks] [5 Clocks] [6 Clocks]
DRAM RAS# Activate to Precharge Delay [15 Clocks]
Configuration options: [4 Clocks] [5 Clocks] ~ [18 Clocks]
DRAM Write Recovery Time [4 Clocks]
Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks]
[6 Clocks]
A S U S P 5 L D 2 D e l u x e A S U S P 5 L D 2 D e l u x e
A S U S P 5 L D 2 D e l u x e A S U S P 5 L D 2 D e l u x e A S U S P 5 L D 2 D e l u x e
[Enabled]
[Auto]
[PCI Express/Int-VG]
[Disabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[Auto]
Enable or disable
DRAM timing.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
4 - 2 7 4 - 2 7
4 - 2 7 4 - 2 7 4 - 2 7