Cpu Installation Procedures - MSI MS-6117 User Manual

2.1-1 CPU Installation Procedures

There are two kinds of Pentium
OEM version and the Boxed version. OEM Pentium
Heat Sink, Fan and Heat Sink Support, while the Boxed Pentium
Processor is provided with Heat Sink w/ fan and Heat Sink Support.
A. OEM Pentium
Processor
Lock
®
Pentium II
Processor
Heat Sink
Support
Top Bar
Heat Sink
Support Base
Required Things:
®
Pentium II processor - Processor.
*Retention Mechanism(RM) - Plastic Guide that holds the S.E.C. Catridge
*Retention Mechanism Attach Mount(RMAM) - Bolt/Bridge assemblies
*Heat Sink Support Base (HSSBASE) - Plastic support bar mounted to
®
II processor that is currently used: the
®
II Processor Installation Procedures
Heat Sink
Support Pin
in the Slot 1 connector.
inserted up through the bottom of the
motherboard. RM secures to RMAM ( 2
RMAM required per RM ).
the mainboard under the ATX heatsink.
(One leg is always bigger than the other one)
2-2
®
II Processor has no
®
II
Heat Sink
W/Fan
Notch Hole
Retention
Mechanism