Rtp/Rtcp - Panasonic KX-NCP1000 Programming Manual

3.1.9 RTP/RTCP

Default
101
Value Range
96–127
3.1.9 RTP/RTCP
Slot
Indicates the slot position (reference only).
Default
Current slot number
Value Range
Slot number
Port
Indicates the port number (reference only).
Default
Current slot number
Value Range
Port number
Connection
Indicates the port status.
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
RTP QoS Ability
Specifies the type of value to be stored in the ToS field in the IP header.
Default
ToS
Value Range
ToS, DSCP, HEX
34 Programming Manual for Virtual SIP CO Line Card Document Version 2009-12