GE JE2800A Use And Care Manual page 6

Your Touch Control
The control panel allows you
to set the oven controls
electronically with the touch
of a finger. It's designed to be
easy to use and understand.
1. DISPLAY. Displays time of
day, time counting down during
cooking functions, power level,
internal food temperature, cooking
mode and instructions.
2. TIME COOK. Microwave
for a preset amount of time using
automatic power level 10 (High) (or
change power level after entering
cooking time. See page 8.)
3. DEFROST. Gentle thawing at
automatic power level 3 (Low). (If
desired, you may change power
level after entering defrosting time.
See page 12.)
4. NUMBER PADS. Touch
these pads to enter cooking time,
defrosting time, time of day,
temperature or power level.
5. CLOCK. Touch this pad
to enter time of day or check time
of day while microwaving. To set
clock, first touch CLOCK pad
and then enter time of day. For
example, if time is 1:30, touch
number pads 1, 3 and O and "1:30"
will appear on display. Then touch
START pad. To reset or change
time, simply repeat above process.
6. POWER LEVEL. Touch this
pad before entering another power
level number if you want to change
from automatic power level 10
(High) for cooking or power
level 3 (Low) for defrosting.
7. TEMP COOK/HOLD. Use the
temperature probe to cook by using a
preset temperature. Once fti reaches
preset temperature, oven switches
to HOLD setting and maintains that
temperature until you touch the
CLEAR/OFF pad. (See page 9.)
Use the control panel to Temp Cooti
Hold with a choice of temperature,
Defrost and Time Cook with choice
of power levels from 1 (lowest) to
10 (highest), time kitchen tasks with
the Min/Sec Timer and set the clock.
6
feature uses no microwave energy.
It can function as a kitchen timer,
as a holding period timer after
defrost or as a delay timer before
time or temperature cooking. (See
page 7.)
9. CLEAR/OFF. When touched,
it shuts off the oven and erases all
settings (except time of day).
10. START. After all selections
are made, touch this pad to start
the oven.
When using TEMP COOK/
HOLD function, you have
entered a temperature less than
When setting clock, you have
not entered a valid clock time.
. Probe has been forgotten when
TEMP COOK/HOLD function
is being used.
Probe is not securely seated in
oven wall receptacle.
Create your own programs to suit
your individual cooking style. For
example: use the Min/Sec Timer
to delay the start of Temp Cook/
Hold or Time Cook, or program a
hold time between Defrost and
Time Cook. (See page 7.) Set Time
Cook to desired cooking time; oven
shuts off automatically at end of
time. (See page 8.)