Page 1
R4827 Please keep this instruction sheet for future reference, as it contains important information. Requires two “AA” batteries (included) for operation. Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). Wipe this toy with a clean cloth dampened with a mild soap and water solution.
Battery Replacement 1,5V x 2 “AA” (LR6) For best performance, we recommend replacing the batteries that came with this toy with two, new “AA” (LR6) alkaline batteries. • Locate the battery compartment on the bottom of the toy. • Loosen the screw in the battery compartment door with a Phillips screwdriver.
Page 3
Stop & Go! • Press down on the driver’s seat or fl ip open the stop sign for fun sounds and lights! • The doors are designed to break away from the product. If the doors come off, replace them on the bus. Insert one end of the door, at an angle, and “snap”...