Kyocera KM-6030 Operation Manual page 94

Troubleshooting
Error Messages
The left tray exceeds
capacity. Remove paper,
and press "Start" key.
(Too much paper in left
tray. Remove paper, and
press "Start" key.)
The left tray exceeds
capacity. Remove paper,
and press "Continue" key.
(Too much paper in left
tray. Remove paper, and
press "Continue" key.)
Finisher paper capacity
exceeded. (Tray #)
Remove paper, and press
"Start" key.
Finisher paper capacity
exceeded. (Tray #)
Remove paper, and press
"Continue" key.
These functions cannot be
combined.
Exceeds pre registered
copying quantity.
(Copy limit for this ID-code
has been reached. No
copying possible.)
Insert key counter.
Memory full.
Memory full. Delete the
registered data in the box.
(Memory full. Delete the
registered data from box.)
Toner will be empty soon.
Ready to copy. Add toner.
Add toner to resume
copying.
Image Cycle.
(Now adding toner.)
6-6
Downloaded From ManualsPrinter.com Manuals
Checkpoints
Is the maximum storage capacity of
the output tray exceeded?
Is the maximum storage capacity of
the output tray exceeded while using
printer functions?
Is the maximum capacity of the
optional document finisher exceeded?
Is the maximum capacity of the
optional document finisher exceeded
while using printer functions?
Have you selected functions that
cannot be used together?
Is the maximum limit for copying as
specified in Job Accounting mode
exceeded?
Is the key counter inserted correctly?
—
—
—
—
—
—
Corrective Actions
Remove paper from the output tray
and press the Start key to resume
copying.
Remove paper from the output tray
and press [Continue] to resume
copying.
Remove paper from the document
finisher tray and press the Start key to
resume copying.
Remove paper from the document
finisher tray and press [Continue] to
resume copying.
Check the settings.
The copy volume has been reached
the set limit of your department. No
additional copying is possible. Use the
copy management function to clear
the copy count.
Insert the key counter securely and
completely.
The memory buffer is full. Print or
delete the scanned data so far. No
further copying or scanning is
possible until either operation has
been executed.
The data box for document
management functions has been
reached the permissible capacity.
When assigning new originals to the
boxes, delete unnecessary data.
Prepare the replacement toner
container.
The copier is running low on toner;
only one page may be copied at a
time. Prepare a replacement toner
container.
Replace the toner container.
Toner replenishment is in progress.
Wait until the process is completed.
Reference
Page
—
—
—
—
—
Advanced
Operation
Guide,
Chapter 4
—
—
Advanced
Operation
Guide,
Chapter 2
page 5-4
page 5-4
page 5-4
—