Lenovo ThinkPad Edge E330 Maintenance Manual page 71

When installing:
Plug the orange cable into the connector marked MAIN, and the blue cable into the connector marked
AUX on the card.
Removal steps of mSATA solid-state drive
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Never remove the drive while the computer is operating or in suspend mode.
• After installing the drive, go to http://www.lenovo.com/support for instructions on configuring the drive.
Step Screw (quantity)
1
M2 × 3.5 mm, small-head, nylon-coated (1)
1
Chapter 9
Color Torque
Black 0.181 Nm
(1.85 kgfcm)
.
Removing or replacing a FRU
65