Table of Contents
Advertisement
the mask fits properly. Beards and facial hair may keep masks from sealing properly.
Change filters often. Disposable paper masks are not adequate.
10.
do not overreach. Keep proper footing and balance at all times. Do not reach over
or across running machines.
Maintain this tool with care. Keep tools clean for better and safer performance. Follow
11.
instructions for lubricating and changing accessories. Inspect tool cords periodically
and, if damaged, have them repaired by an authorized technician. The handles must
be kept clean, dry, and free from paint at all times.
12.
stay alert. Watch what you are doing, and use common sense when operating any tool.
Do not use this tool while tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating a tool can result in serious personal injury.
13.
check for damaged parts. Check for alignment and binding of moving parts, broken
parts, leaks, or damaged mounting fixtures, and any other condition that may affect
proper operation. Any part that is damaged should be properly repaired or replaced
by a qualified technician. Do not use the tool if the Trigger (26) does not turn it On and
Off properly.
14.
replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended
for use with this tool.
15.
clean sprayer with care. Use nonflammable solvents.
avoid fire danger. Do not smoke while using the Spray Gun. Never spray near open
16.
flames, pilot lights, stoves, heaters, or any other heat source. Most solvents and coat-
ings are highly flammable, particularly when spraying. The work area must always have
adequate ventilation.
read all information concerning coating products. Chlorinated solvents (1-1-1
17.
Trichlorethylene and Methylene Chloride, also known as Methyl Chloride) can chemi-
cally react with aluminum and may explode. Many paint sprayers contain aluminum. If
you have any doubt about potential chemical reactions, contact the solvent or coating
manufacturer.
Materials used when painting or cleaning may be harmful or fatal if inhaled or
18.
swallowed. Use a respirator or mask when painting or using cleaning solvents.
use only in well-ventilated areas.
19.
never release the sprayer lid while the cup is pressurized. The paint could burst
20.
out and contaminate your body or cause other property damage or personal injury.
be aware of other people and animals. Do not use the sprayer near children or ani-
21.
mals. Keep all visitors away from the work area. Do not let children or visitors handle
tools.
industrial applications must follow osHa requirements.
22.
for technical questions, please call 1-800-444-3353.
SKU 96382
Page 3
Advertisement
Table of Contents
