Stop The Engine - McCulloch M125-85F Operator's Manual

3 M125-85FH
Carefully press down one of the pedals until the required
speed is obtained. Pedal (1) is used to drive forwards, and
pedal (2) to drive backwards.
1
2
4 Select the required cutting height (1-5) using the cutting
height lever.
IMPORTANT!
Never use position S when mowing. Position S is the
service position.
5 Lower the cutting unit.
6 Start the blades by first releasing the lever and then
moving it forward.
CAUTION!
The life span of the drive belts is increased significantly if
the engine runs at a low speed when the blades are
engaged. Therefore apply full throttle first when the cutting
unit has been moved to the mowing position.
Driving

Stop the engine

Always park the machine on a level surface with the engine
OFF. Avoid idling the engine for long periods, as there is a risk
of carbon build-up on the spark plugs.
1 Disengaging the blades.
2 Lift up the cutting deck by stepping on the lifting pedal and
pressing in the lock button.
3 M125-85F Pull back the throttle and move the gear shift
lever to "N" – neutral position. Turn the ignition key to the
"STOP".
M125-85FH Pull back the throttle and turn the ignition key
to the "STOP" position.
4 When the ride-on mower is at a standstill, engage the
parking brake.
N
– 19
English