Removing The Cutting Unit; Charge The Battery; Connecting The Battery - McCulloch M125-85F Operator's Manual

8 Tension the belt with the belt adjuster.
9 Fit the front cover.
10 Set the cutting deck height control in any of the positions
1-5.

Removing the cutting unit

The cutting deck can be removed in order to facilitate cleaning
and servicing.
To remove the cutting deck proceed as follows:
1 Position the machine on flat ground.
2 Apply and lock the parking brake.
3 Check that the lever for setting the cutting height is in the
S position.
4 Lower the cutting deck to the mowing position.
ASSEMBLY
5 Release the clip on the right side of the mower deck and
lift the cover off the mower deck.
6 Disengage the spring for the drive belt tensioning wheel.
7 Remove the belt.
8 Grab the upper pipe construction of the deck and pull it
out.

Charge the battery

The battery must be charged with max. 3 Amp for 4 hours
before using the lawnmower for the first time. See the battery
charger instructions on how to connect the battery charger.

Connecting the battery

When the battery is fully charged, connect the red cable to the
positive pole (+pole) of the battery and the black and blue
cable to the negative pole (-pole).
2.
1.
English
– 15