Table of Contents
Advertisement
After you install the camera and software,
follow these steps to find and use the camera
commands.
1. From the application software you are
using, select
iCam320
2. From the application software you are
using, acquire the camera. The TWAIN
window opens and you see the image
captured by the camera.
Image Format Settings
You can choose different image sizes, de-
pending on your monitor's display size. The
application software offers five image size
choices. Select lower image sizes for low-
resolution images or high image sizes
for high-resolution images.
To change the image size, click on
the TWAIN window. The Still Image screen
appears.
Size — Your camera's default image size
setting is
, but you can adjust this
320 * 240
value to
,
160 * 120
176 * 144
.
480
Note: The larger the image size you choose,
the more memory space it occupies and the
longer the file takes to transfer.
Color Space/Compression — Your camera
as the source.
can work with video images that are pro-
cessed with characteristics called color
space and compression . Your camera's de-
fault color space/compression setting is
Advanced users can adjust this value to
SP62
Capturing and Transferring
Images
Once you open the TWAIN window, the pro-
cess used to capture and transfer images is
the same, regardless of the application soft-
ware you used with your camera.
Note: Depending on the application software
you use to capture and transfer images, the
steps you use might be different than these
steps.
1. Start the application software you want
2. Use the application software you chose
on
Size
3. To capture an image, press the snap-
4. To take more than one photo or direct
5. To repeatedly take a photo, click on
,
, or
352 * 288
640*
Software Operation
,
, or
.
IYUV
RGB24
to use to capture and transfer images.
to scan a new picture. The target image
appears.
shot button on top of the camera or click
on
on the TWAIN window.
Take Picture
The camera freezes the image and dis-
plays it on the left screen of the TWAIN
window.
transfer an image to an application, click
Delay Time on the lower right side of
the screen, then click the related button.
The Setup Self
Time dialog box
appears.
, then select a display
picture repeatedly
interval (from 1 to 100 seconds) for each
.
I420
,
I420
Take
7
Advertisement
Table of Contents
