Heat & Glo PALOMA-BZ-MOD Owner's Manual page 36

RIGHT AND REAR CLUSTERS
REAR ROCK
CLUSTER
Figure 4. Right and Rear Rock Clusters Make Contact
3. Place left rock cluster in firebox as shown in Figure 5.
The left end of the cluster should touch the left wall of
the firebox. Push cluster back until the rear and left rock
clusters contact each other as shown in Figure 6. Ensure
the rock clusters are not covering any burner ports.
WARNING! Risk of Explosion! Follow instructions for
placing rock clusters. DO NOT allow rock cluster to cover
burner ports. Improperly placed rock cluster will interfere with
proper burner operation.
LEFT ROCK
CLUSTER
Figure 5. Placing Left Rock Cluster
36 Heat & Glo • PALOMA-BZ-MOD, PALOMA-GR-MOD, PALOMA-GY-MOD • 2189-900 R14 • 11/14
MAKE CONTACT
RIGHT ROCK
CLUSTER
BASEPAN LEDGE
LEFT AND REAR
CLUSTERS
MAKE CONTACT
LEFT ROCK
CLUSTER
Figure 6. Left and Rear Rock Clusters Make Contact
4. Ember material is shipped with this kit. To place the ember
material:
WARNING! Risk of Explosion! Follow ember placement
instructions. DO NOT place embers directly over burner
ports. Replace ember material annually. Improperly placed
embers interfere with proper burner operation.
• Embers CANNOT be placed directly over ports. Care
should be taken not to cover the lighting trail of ports (from
back to front).
• Place dime-size pieces of embers in the areas highlighted
in Figure 7. Care should be taken so that the ports are not
covered. Failure to follow this procedure will likely cause
lighting and sooting problems.
EMBERS
Figure 7. Ember Placement
REAR ROCK
CLUSTER