Table of Contents
Advertisement
501971102019_IFU_UK:Layout 1
Installation
• Install the appliance away from heat sources. Direct exposure to sunlight or installation near heat
sources (radiators, cookers) will increase energy consumption and should therefore be avoided.
• If this is not possible, the following minimum distances must be respected:
-30 cm from coal or oil stoves;
-3 cm from electric and/or gas cookers.
• Clean the inside (refer to "Maintenance and cleaning" of the appliance).
• Insert or install the accessories/parts supplied.
Using the product
This appliance is an electronically controlled, drawers refrigerator for the storage of fresh food and
beverages.
Refrigerator compartment defrosting is completely automatic.
Optimum performance depends on the climatic class indicated on the rating plate.
This product is fitted with a drawers' internal ventilation system. For this reason, attention should be paid
to the ventilation holes. Foods and beverages should be stored in closed containers or covered with film.
Switching the appliance on and temperature adjustment.
Switch the power to the appliance on.
The ideal temperatures for preserving foods are already factory set.
Notes:
• 4-5 hours are required for the refrigerator compartment to reach a temperature suitable for storage.
• Ambient temperature, frequency of drawer opening and position of the appliance can affect the
temperature inside. These factors should therefore be taken into account when setting temperatures.
• In storing the food in the drawers, ensure vents are not obstructed.
• Do not place hot food in the compartments.
• Store liquids in closed containers.
• Storing vegetables with high water content can cause condensation to form: this does not affect correct
appliance operation.
7-01-2008
13:57
Pagina 6
6
Hide quick links:
Advertisement
Table of Contents
