SEAT PAN
FLAT WASHER
LOCK WASHER
ADJUSTMENT
BOLT
HOW TO SET UP YOUR TRACTOR
CONNECT BATTERY (See Figs. 3 and 4)
CAUTION: Do not short battery termi-
nals by allowing a wrench or any other
object to contact both terminals at the
same time. Before connecting battery,
remove metal bracelets, wristwatch
bands, rings, etc.
Positive terminal must be connected
fi rst to prevent sparking from accidental
ground ing.
•
Lift seat pan to raised position.
•
Remove terminal protective caps and discard.
•
If this battery is put into service after month and year
indicated on label (label located between terminals)
charge battery for minimum of one hour at 6-10 amps.
(See "BATTERY" in the Maintenance section of this
manual for charg ing in struc tions).
•
First connect RED battery cable to positive (+) terminal
with hex bolt and keps nut as shown. Tighten securely.
Slide terminal cover over terminal.
•
Connect BLACK grounding cable to negative (-) ter-
minal with remaining hex bolt and keps nut. Tighten
securely.
ASSEMBLY
SEAT
SHOULDER
BOLT
02465
FIG. 2
TERMINAL
COVER
02604
POSITIVE (RED)
CABLE
SEAT PAN
02602
7
DISCARD TER MI NAL
PROTECTIVE CAPS
KEPS
NUT
NEGATIVE (BLACK)
CABLE
FIG. 3
LABEL
FIG. 4
HEX BOLT