Initial Setup and Menu
5 9
Perfi_rming the initial setup
2
3
Press the • (arrow) button then press the GREEN button.
The Brand screen will appear.
Use the A/•
(arrow) buttons to select the brand name then
press the OK button.
ol. Select a field and press the OK button to show the
software keyboard. Enter the first few characters of the
brand name and press the GREEN button. The brand
name starting with the entered characters will appear on
the Brand screen.
4
Press the OK button.
Model Name screen will appear.
Model Name
1
2
Press the GREEN button.
The Model Name screen will appear.
Use the A/•
(arrow) buttons to select the model name then
press the OK button.
ol. Select a field and press the OK button to show the
software keyboard. Enter the first few characters of the
model name and press the GREEN button. The model
name starting with the entered characters will appear on
the Model Name screen.
3
Press the • (arrow) button to select Code Set then press the
OK button.
Code Set screen will appear.
Code Set
1
Use the "_/_, (arrow) buttons to select the code.
.t.
After the code is selected, press the RED button to show
the Test screen. The test will start automatically.
NOTN
If a modelhasmorethanoneCodeSet,a message w ill appear stating"This
model h asmorethanoneCodeSet.Please selectandtestyourpreferred
CodeSet."Youwill need to choosea codesetusingthe A/•
(arrow)
buttonsandperform theTestoptionto ensure the correct C odeSethas
been selected.
2
Press the OK. button
Input & Mode Key screen will appear.