Your.set-Top.box's.front.panel - Pace DS810 Manual

YouR PACe set-toP Box

YOUR.SET-TOP.bOx'S.FROnT.PanEL

ExIT.button.
To remove the EPG or channel list
from the screen
EPG.button.
To display the EPG
(Electronic Programme Guide)
U.D.(arrow.buttons).
To display the Zapping Window
To highlight the previous or next item in a
list or on-screen menu
L R.(arrow.buttons).
To move to the left and the right through
on-screen menus, lists or items
To change settings on the screens
OK.
To display the on-screen channel list
To confirm a choice
To save settings
Before you start installing your set-top box, please
check you have the following items:
Your Pace set-top box;
Your remote control;
1 SCART lead;
1 HDMI lead;
1 mains lead;
2 'AA' batteries for the remote control .
4
Standby.button.(S).
To switch your set-top box on and off
Indicator.light
Red = in standby
Blue = switched on and out of standby
IR.RECEIVE.light
Red - flashes when your set-top box is receiving a
signal from your remote control
LED.display.
- shows the current time when your
set-top box is in standby
- shows the channel number when
tuned to a TV or radio channel
CI-module.door
Push to open door to access the
CI-module slot .
See page 10 for details
note: the front panel of your set-top box is
covered with a protective clear plastic film.
You should carefully remove this film before
using your set-top box.