Advertisement
Programming CAPN module buttons
Programming
CAPN module
buttons
Monitoring
Internal Autodial
indicators
Page 3 Enterprise Edge CAPN User Card
External Autodial
1. Replace the handset.
ƒ•⁄
2. Press
3. Press a CAPN module button.
4. Dial the external number.
5. Press OK to store the number.
6. Label your new button.
Erasing memory buttons
1. Replace the handset.
ƒ•⁄
2. Press
3. Press the memory button you
want to erase.
4. Press OK to erase the button.
Moving external line buttons
1. Replace the handset.
ƒ•⁄
2. Press
3. Press the line button that you
want to move.
4. Press the memory button on
your telephone or CAPN
module to which you want the
line moved.
5. Label your new button.
It is important that you pay attention to the indicators beside the Internal
Autodial buttons on your CAPN module. This tells you the status of an
Enterprise Edge telephone when you answer an external call.
An indicator appears:
• when the telephone is active
on an internal or external line
OR
• when the telephone is using
the Do Not Disturb feature
The status of an Enterprise Edge telephone cannot be monitored by your
CAPN module if an Internal Autodial button has not been programmed.
+
Internal Autodial
1. Replace the handset.
.
2. Press
3. Press a CAPN module button.
4. Dial the internal number.
5. Label your new button.
Features
1. Replace the handset.
.
2. Press
3. Press a CAPN module button.
4. Press
5. Label your new button.
.
No indicator appears:
• when the telephone is idle
• when the telephone is ringing
• when the telephone has one
ƒ•¤
ƒ•‹
ƒ
and the feature
code.
OR
OR
or more calls on hold, but is
not connected to any active
calls
.
.
Advertisement
