Battery - HP Spectre x360 Maintenance And Service Manual

5. Remove the bottom cover (2).
6. Turn the computer right side up, with the front toward you.
Reverse this procedure to install the bottom cover.

Battery

Description
Battery, 3-cell, 56-WHr, 4.96-AHr, Li-ion (includes cable)
Before removing the battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information.
To prevent loss of information, save your work or shut down the computer through Windows before
removing the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Release the battery cable from the routing channel (2) built into the battery.
3. Release the speaker cable from the routing channel (3) built into the battery.
Bottom cover on page
To reduce potential safety issues, use only the battery provided with the computer, a
24).
Spare part number
789116-005
Battery 25