Advertisement
To assign or modify a user's settings:
1. Press
42 ent 1 ent
2. Press
to scroll to the correct user number, and
A
then press
.
ent
3. Press
to scroll through the user code menu
A
options.
Modify PIN
A user's PIN is a unique 4 or 6 digit code that
identifies the user to the system.
To assign or modify a user's PIN:
1. Press
until 01=Modify PIN is displayed, and
A
then press
.
ent
2. Enter the user's new 4 to 6 digit PIN. To erase
an incorrect digit, press .
3. Press
to store the PIN.
ent
4. Press and hold
esc
Modify level
A user's level determines the functions and menu
options available to that user.
To assign or modify a user's level:
1. Press
until 02=Modify Level is displayed,
A
and then press
ent
2. Press
or
to scroll up or down to the level
A
B
required.
3. Press
to store the level.
ent
4. Press and hold
esc
Note: A user's level defaults to 3. For information
on the different user levels refer to the full
user guide.
Modify groups
A user's groups determine which system groups that
user has access to and control over.
To assign or modify a user's groups:
1. Press
A
until 05=Modify Groups is displayed,
and then press
ent
2. Enter the group numbers you want to assign to
the user.
.
to return to the banner.
.
to return to the banner.
.
3. To assign the group choice option to a user,
press
after entering the group numbers.
4. Press
to store the user's group allocations.
ent
5. Press and hold
MAX tag
A MAX tag is a prox tag that can be presented to a
proximity reader to set and unset the system and
cancel alarms, faults or tampers.
To assign a MAX tag to a user:
1. Press
until 06=Card No is displayed, and
A
then press
ent
2. Enter the MAX tag's serial number. To erase an
incorrect digit, press .
3. Press
to store the serial number.
ent
4. Press and hold
Alternatively, if you have a keyprox:
(A keyprox is keypad with a built-in proximity
reader)
1. Press
until 06=Card No is displayed, and
A
then press
ent
2. Press and hold
heard.
3. Present the MAX tag to the proximity reader at
the bottom of the keyprox. The MAX tag's
serial number is displayed on the keyprox.
4. Press
to store the serial number.
ent
5. Press and hold
Access control
Access control card
An access control card is a prox tag that can be
presented to a proximity reader to:
Allow access to controlled doors
Cancel alarms, faults or tampers
Set or unset the system
3
to return to the banner.
esc
.
to return to the banner.
esc
.
and
until a double beep is
1
A
to return to the banner.
esc
Advertisement
