Sanyo VPC-E7 Service Manual page 52

AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(–44<=ZW<=47)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(–76<=ZM1<=48)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(–104<=ZM2<=57)
AF_MID3: ZM3
ZM3: adjustment value of focus at zoom position middle3
(–97<=ZM3<=76)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(–98<=ZT<=94)
Adjustment values other than the above are irrelevant.
2. AWB Adjustment
Camera
(color viewer)
Preparation:
POWER switch: ON
Adjusting method:
1. When setting the camera in place, set it to an angle so that
nothing appears in any part of the color viewer except the
white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Pattern box
Dsc Calibration
AWB Result:
1:
AGC=152,323,492,661,828
5F_AGC=1,1,0,1
WB=286,519,689
CHECK=128,128,153
MS=4426,4621
0
IRIS=0
Fno_FOR_ISO=44
SS_FOR_ISO=2400
YLEVEL_FOR_ISO=9513
Adjustment value determination is effectuated using "AGC",
"CHECK" and "MS" values.
If AGC=a1, a2, a3, a4, a5, CHECK=wc0, wc1, wc2, MS= ms1,
ms2 and the adjustment values fulfill the conditions below, they
are determined as within specifications.
Adjustment value determination
100<a1<300, 250<a2<500, 450<a3<650,
550<a4<850, 750<a5<1023
wc0=128 ± 2, wc1=128 ± 2, wc2=130 ± 40
3400<=ms1<=5300, 3450<=ms2<=5350
Adjustment values other than the above are irrelevant.
3. CCD White Point Defect Detect Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select "CCD Defect" on the LCD "Test", and click the "Yes".
3. After the adjustment is completed, OK will display.
4. Click the OK.
– 19 –
x
OK
Copy