Sanyo VPC-E7 Service Manual page 51

3-6. The adjustment item which in necessary in part exchange
Lens
Adjustment
COMPL PWB CP-1
COMPL PWB TB-1
COMPL PWB TB-2
LENS ASSY
: Be sure to carry out the necessary adjustments after replacing the unit.
: Adjustment is possible from the menu setting screen of the camera and by using the calibration software.
3-7. Adjust Specifications
1. Lens Adjustment
Camera
Preparation:
POWER switch: ON
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
Adjustment method:
1. Set the camera 0 cm from the collimator. (Do not enter any
light.)
2. Set the camera so that it becomes center of the screen in
the collimator.
3. Double-click on the DscCalDi.exe.
4. Click the Focus, and click the Yes.
5. Lens adjustment value will appear on the screen.
6. Click the OK.
CCD White Point
AWB
Defect Detect
Adjustment
Adjustment
Collimator
CCD Black Point
And White Point
Factory
Defect Detect
Cord
Adjustment In
Setting
Lighted
DscCalDi
!
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
PZ_SW: PSW
PSW: adjustment value of zoom PR switch position
(945<=PSW+PBR<=1010)
PZ_BR: PBR
PBR: adjustment value of zoom backrush pulse
(0<=PBR<=45)
PZ_SP: PSP
PSP: adjustment value of zoom stowing pulse
(210<=PSP<=320)
AF_SW: ASW
ASW: adjustment value of focus PI switch position
(893<=ASW<=985)
AF_BR: ABR
ABR: adjustment value of focus backrush pulse
(0<=ABR<=12)
– 18 –
USB storage
Language
Reset
information
Setting
Setting
registration
x
Focus Result
PZ_SW: 950
PZ_BR: 19
PZ_SP: 260
AF_SW: 937
AF_BR: 3
AF_WIDE: 11
AF_MID1: -7
AF_MID2: -22
AF_MID3: -20
AF_TELE: -17
OK