Panasonic Workio DP-180 Operating Instructions Manual page 57

3
Selecting the desired Transmission setting. (See page 11)
Your machine can temporarily change the File Type and
File Name by using
FUNCTION
Type and Name). You can select TIFF/JPEG or PDF File
Type and then change the File Name. When sending to:
Internet Fax : select "TIFF/JPEG".
PC : select "TIFF/JPEG" or "PDF".
5
The document(s) is stored into
memory with a file number. Then
starts sending the document(s).
NOTE
4. If the transmission cannot be completed for any reason, the email may be returned
undelivered; otherwise no reply will be printed.
5. For the machine to perform the email address completion the Fax Parameter No. 160
(DEFAULT DOMAIN) must be set to "Valid" and the Default Domain must be pre-
programmed in the User (Internet) Parameters. (See page 144)
6. The "QUICK MEMORY TRANSMISSION" feature is disabled if multiple stations are set.
7. Direct Transmission is not available for LAN communication.
(Gray Scale or Colour are available only
when transmitting/emailing in PDF or
(XMT File
8 6
JPEG file type mode. If you are sending
in JPEG file type mode to an Internet
Fax, the receiving station must support
JPEG format.)
6
When an original is scanned from the Platen
Glass, the message "ANOTHER ORIGINAL?" is
shown.
Place another original, then press
.
START
Machine starts sending.
4a
4b
4c
4d
57