Panasonic Workio DP-180 Operating Instructions Manual page 140

No.
001
002 RESOLUTION
003
004
005
006 DIALLING METHOD
007 HEADER PRINT
008 HEADER FORMAT
009 RCV'D TIME PRINT
012 COMM. JOURNAL
013 AUTO JOURNAL PRINT
014 FILE ACCEPTANCE
017 RECEIVE MODE
022 SUBSTITUTE RECEIVE
140
Setting Your Machine
Fax Parameters
Setting
Parameter
Number
CONTRAST 1
(HOME)
2
3
4
5
1
(HOME)
2
3
ORIGINAL 1
(HOME)
2
3
STAMP 1
(HOME)
2
MEMORY 1
(HOME)
2
1
2
1
2
3
1
2
1
2
1
(HOME)
2
3
1
2
1
REPORT
2
1
2
1
2
Setting
Lightest Setting the home position for the CONTRAST.
Lighter
Normal
Darker
Darkest
Standard Setting the home position for the RESOLUTION.
(S-Fine selects either 400 or 600 dpi. See Fax Parameter
Fine
No. 120.)
S-Fine
Text Setting the home position for the ORIGINAL.
Text/Photo
Photo
Off Setting the home position for the STAMP.
To select the stamp function when document is stored in
On
memory, see Fax Parameter No. 28.
Off Setting the home position for the MEMORY.
On
Pulse Selecting the dialling method.
Tone
Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside
Outside : Outside TX copy area.
No print
No print : Header is not printed.
Logo ID No. Selecting the header format.
From To
Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
Valid
on the bottom of each received document.
Off Selecting the home position of printout mode for COMM.
Journal.
Always
Off : Does not print
Inc. Only
Always : Always prints
Inc. Only : Prints only when communication has failed.
Invalid Selecting whether the machine prints the journal
automatically after every 200 transactions.
Valid
Invalid Selecting whether the machine prints the file acceptance
journal.
Valid
If you set this parameter to valid, a journal will print out after
any memory communication.
Manual Setting the reception mode to automatic or manual.
Auto
Invalid Selecting whether the machine receives to memory when
the recording paper runs out, toner runs out or the recording
Valid
paper is jammed.
Comments