Panasonic TC-14B3R Operating Instructions Manual page 7

INSTALLATION AND SET- UP
2
Switch ON your VCR (if connected).
Switch ON your Satellite Receiver (if connected).
Plug the TV into a mains socket and switch ON.
Programmes will appear immediately if your
dealer has already tuned the TV for you.
4
The first available channel will be displayed.
1
The TV stations will be stored in the order that they
have been found, if the order is not to your
preference it can be rearranged. Refer to the
Tuning menu Swap feature - see page 9 for
details.
IT IS IMPORTANT that you only use TV programme position ' 0' to view your VCR. If your VCR picture does not appear on programme
position ' 0' (the VCR position), it will be necessary to either adjust the RF channel of the VCR (refer to your VCR operating instructions) or
adjust the tuning of the TV' s programme " 0"or both until the RF output channel of the VCR is received, refer to page 11 for guidance.
6
3
If the TV has not been tuned for you then
Auto setup will begin. TV stations will be
located and stored.
1
Auto Setup
21
Volume adjust
69
Programme change