Switches And Controls; Lighting Control - Mazda 2007 MazdaSpeed6 Owner's Manual

Mazdaspeed6_8V77-EA-06F_Edition1 Page174
Tuesday, May 9 2006 10:44 AM
Driving Your Mazda

Switches and Controls

Lighting Control

qHeadlights
To turn on the lights, turn the headlight
switch on the end of the control lever.
Switch Position
Headlights Off
Taillights
Parking lights
License lights
Off
Side-marker lights
Dashboard
illumination
NOTE
If the light switch is left on, the lights
l
will automatically switch off 30
seconds after turning the ignition
switch to the LOCK position or
removing the key.
The lights will automatically switch
back on when the ignition switch is
turned to the ACC or ON position.
To prevent discharging the battery,
l
don't leave the lights on while the
engine is off unless safety requires
them.
5-36
Form No.8V77-EA-06F
Xenon fusion headlight bulbs
The low-beam bulbs of the headlights
have xenon fusion bulbs that produce a
bright white beam over a wide area.
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement is
necessary.
NOTE
Off On
If the headlights flicker, or the
brightness weakens, the bulb-life may
On On
be depleted and a replacement is
necessary. Consult an Authorized
Mazda Dealer.
qLights-On Reminder
If lights are on and the key is removed
from the ignition switch, a continuous
beep sound will be heard when the
driver's door is opened.
NOTE
When the advanced keyless function is
used and the start knob is in the ACC
position, the Start Knob Not in LOCK
Warning Beep (page 3-16) overrides
the lights-on reminder.
Black plate (174,1)
WARNING