Automatic application,
engine off
With the vehicle stationary, the parking brake
is automatically applied when the engine is
switched off.
The application of the parking brake is
confirmed by:
-
illumination of the braking warning
lamp and of the P warning lamp in
the control lever A ,
-
display of the message
"Handbrake on".
Before leaving the vehicle, ensure
that parking brake warning lamp in
the instrument panel is on fixed (not
flashing).
Never leave a child alone inside the
vehicle with the ignition on, as they
could release the parking brake.
In the case of towing, a loaded vehicle
or parking on a gradient, turn the front
wheels towards the pavement and
engage a gear when you park.
Automatic release
The electric parking brake releases
automatically and progressively when you
press the accelerator:
Manual gearbox: press down fully on the
clutch pedal, engage first gear or reverse,
press on the accelerator pedal and move off.
6-speed electronic gearbox system :
select position A , M or R then press on the
accelerator pedal.
Automatic gearbox : select position D , M
or R then press the accelerator pedal.
Full release of the parking brake is confirmed
by:
-
the braking warning lamp and
the P warning lamp in the control
lever A going off,
-
display of the message
"Handbrake off".
When stationary, with the engine
running, do not press the accelerator
pedal unnecessarily, as you may
release the parking brake.