Useful Features; Ch-Setting - Sharp LC-20SH4U Operation Manual

Useful Features

CH-SETTING

■ EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate EZ
SETUP, perform the following procedures.
1 Press '/" to select "CH-SETTING" in the SETUP screen
(refer to page 17.), and press ENTER.
2 Press '/" to select "EZ SETUP", and press ENTER.
3 Press '/" to select "YES", and press ENTER.
Refer to page 13 for more information on EZ SETUP.
■ Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH-SETTING", and press ENTER.
4
Press '/" to select "AIR/CABLE", and press ENTER.
Press '/" to select desired setting, and press ENTER.
E Z E Z S E T U P S E T U P
A I R / C A B L E A I R / C A B L E A I R A I R
C H C H S E A R C H S E A R C H
C H C H M E M O R Y M E M O R Y C A B L E C A B L E
5
Press MENU to exit.
A
• Receivable channels of your LCD TV set are:
AIR channels:
VHF: 2 through 13
UHF: 14 through 69
CABLE channels:
1 (HRC and IRC)
2 through 125 (STD, HRC and IRC)
■ Saving broadcast TV channels in the memory
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH-SETTING", and press
ENTER.
4
Press '/" to select "CH SEARCH", and press
ENTER.
E Z E Z S E T U P S E T U P
A I R / C A B L E A I R / C A B L E C A B L E C A B L E
C H C H S E A R C H S E A R C H
C H C H M E M O R Y M E M O R Y
5
Press ENTER. The tuner will search through all
available channels in your area and add them to the TV
memory.
S T E R E O S T E R E O
S A P S A P
M O N O M O N O
A
• To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels.
■ Adding weak or additional channels or erasing
unwanted channels from TV memory
Individual settings of programs can be adjusted.
1
In step 4 above, press '/" to select "CH MEMORY",
and press ENTER.
E Z E Z S E T U P S E T U P
A I R / C A B L E A I R / C A B L E C H A N N E L C H A N N E L
C H C H S E A R C H S E A R C H S K I P S K I P
C H C H M E M O R Y M E M O R Y
2
Press '/" to move the cursor to "CHANNEL", and use
\/| or Channel Select to select each desired channel
to add or erase.
3
Press '/" to move the cursor to "SKIP", and use \/|
to select "ON" or "OFF".
4
Press MENU to exit.
A
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
1 1
2
A I R A I R 2 2
O N O N
21