Cycle Selection Chart - GE GSD750 Use And Care Manual

Dial Cycles
(continued)
The RINSE & HOLD cycle is for rinsing partial loads
which will be washed later. D() not u,$e deterge?zt.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
d. Latch the door to start the cycle.

Cycle Selection Chart

10.6
7.4
SHORT WASH
3.()
l:
'
PLATE
(PRESS HEATED DRYI
Minutes
WARMER
RINSE & HOLD
I PRESS HEATED DRY OFFI
The PLATE WARMER cycle (on some models)
is for warming clean dishes and serving plates for
the serving of hot foods. The cycle will take
approximately 35 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY ON.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle [ndicator dial to
PLATE WARMER.
e. Latch the door to start the cycle.
DRY ON
'i,
HEATED
5