Cisco SPA2102 Administration Manual page 36

Basic Administration and Configuration
Using the Administration Web Server
STEP 3
STEP 4
STEP 5
Cisco Small Business ATA Administration Guide
Complete the WAN configuration for DHCP, static IP addressing, or PPPoE.
For DHCP:
a. Select DHCP from the
b. If you use a cable modem, you may need to configure the MAC Clone Settings.
(Contact your ISP for more information.)
c. If your service uses a specific PC MAC address, then select yes from the
d. Then enter the PC’s MAC address in the
For Static IP Addressing:
a. Select Static IP from the
b. In the Static IP Settings section, enter the IP address in the
subnet mask in the
field.
c. In the Optional Settings section, enter the DNS server address(es) in the
and optional
For PPPoE:
a. Select PPPoE from the
setting for most DSL users.
b. Enter the values provided by the ITSP in the following fields:
• PPPoE Login Name
• PPPoE Login Password
• PPPoE Service Name
Click
To verify your progress, click the
, confirm the
, and
drop-down menu.
setting.
field, and the default gateway IP address in the
drop-down menu. This is the correct
. The ATA device reboots.
tab and then click
,
.
field.
drop-down menu.
fields.
. Under
,
2
field, the
,
36