Setup The Homeplug Avs; For Twin Pack; For Single Pack - Aztech HL110E User Manual

User Manual

Setup the HomePlug AVs

For Twin Pack

HomePlug AVs from a Twin Pack are preconfigured to have a common Private Network
Name unique for that pair. All you need to do is connect the HomePlug AVs to an
Ethernet device and then plug it to a wall socket.
To setup a pair of HomePlug AVs:
1. Plug one end of the Ethernet cable to your Ethernet device and then connect the
other end to HomePlug AV.
2. Connect the HomePlug AV to a wall socket.
3. Plug one end of the Ethernet cable to your other Ethernet device and then
connect the other end to HomePlug AV.
4. Connect the HomePlug AV to a wall socket.

For Single Pack

A HomePlug AV from a single pack uses a random Private Network Name that prevents it
from communicating with other HomePlug AVs. To add it into an existing network, you
need to use either the Simple Connect button or the HomePlug AV Utility software to
change the random Private Network Name to the Private Network Name being used by
the existing HomePlug AV network.
To add a HomePlug AV to an existing network:
1. Plug one end of the Ethernet cable to your Ethernet device and then connect the
other end to HomePlug AV.
2. Connect the HomePlug AV to a wall socket.
3. Add the new HomePlug AV by using either Simple Connect or the HomePlug AV
Utility software. To use Simple Connect, please refer to
HomePlug AV
Network Name.
Page 22 of 40
Network. To use HomePlug AV Utility, please refer to
Joining an Existing
Private