Aztech HL129EP Easy Start Manual

DEVICES ARE PLUG
AND PLAY READY.
A

Package Contents

The following items below are included in your HL129EP package.
HL129EP Ethernet
Cable
B

Device Overview

Power LED
Powerline
Activity LED
Ethernet
Activity LED 1
Ethernet
2
Activity LED 2
Simple
Connect
Button
HomePlug AV2 devices are preconfigured with a common Private Network Name. Adding new HomePlug AV2 devices to an existing
network with the default Private Network Name is as easy as plugging the device into the power outlet. If you wish to have a unique
Private Network Name, simply follow the instructions below. This Easy Start Guide, the User Manual, and the HomePlug AV Utility
software is included in the Resource CD and is also downloadable on our Aztech Support Website (www.aztech.com/support).
Resource CD Easy Start
Guide
NOTE : You may use this AC Pass-
through as an extra power outlet.
** The HL129EP is
also available in a
DEU Plug variant.
BOTTOM VIEW
MODEL
HL129EP
C Setting up your HomePlug AV Network
STEP 1 :
In Room A, plug in your HomePlug AV2 device into the power outlet
and connect it to the modem router using an Ethernet cable.
NOTE: Ensure that your modem router's internet connection is UP to
allow access to the internet.
Ethernet
STEP 2 :
Port 1 & 2
In Room B plug in your other HomePlug AV/HomePlug AV2 device
Reset
into the power outlet and connect it to your computer's Ethernet port
Button
using an Ethernet cable.
STEP 3 :
Confirm that a connection has established on both HomePlug AV/
HomePlug AV2 devices. All three LEDs (Power
the corresponding Ethernet LED
Network is now ready to use and can now access Internet.
, Powerline , and
) must be ON. Your Homeplug AV