Table of Contents
Advertisement
GA-8IDMR Motherboard
IDE Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the
computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type
which will automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
CYLS.
Number of cylinders
HEADS
Number of heads
PRECOMP
Write precomp
LANDZONE
Landing zone
SECTORS
Number of sectors
If a hard disk has not been installed select NONE and press <Enter>.
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.
None
No floppy drive installed
360K, 5.25 in.
5.25 inch PC-type standard drive; 360K byte capacity.
1.2M, 5.25 in.
5.25 inch AT-type high-density drive; 1.2M byte capacity
(3.5 inch when 3 Mode is Enabled).
720K, 3.5 in.
3.5 inch double-sided drive; 720K byte capacity
1.44M, 3.5 in.
3.5 inch double-sided drive; 1.44M byte capacity.
2.88M, 3.5 in.
3.5 inch double-sided drive; 2.88M byte capacity.
System Information
Please press enter to view the system configuration.
2 8
Advertisement
Table of Contents
