Configuration Tool - Planet Networking & Communication WAP-1963 User Manual

3.8

Configuration Tool

The Configuration Tool screen allows you to backup, restore and reset WAP-1963A configuration
settings. Saving the configuration settings provides an added protection and convenience should
problems occur with the WAP-1963A and you have to reset to factory default. When you save the
configuration setting (Backup) you can re-load the saved configuration into the Access Point through
the Restore selection. If extreme problems occur you can use the Restore to Factory Default
function, this will set all configurations to its original default settings.
Parameter Description
Please click "Save..." button. That will save the Access Point's current
Backup Settings
configuration to a file named "config.bin" on your PC.
Please click "Browse..." to find out the config.bin, and then click "Upload" to
Restore Settings
restore the saved configuration to the Access Point.
Click "Reset". This function will restore WAP-1963A to original factory settings.
Restore to Factory
29