Wireless Advance Settings - Planet Networking & Communication WAP-1963 User Manual

3.3

Wireless Advance Settings

You can set advanced parameters of this WAP-1963A. The parameters include Authentication Type,
Fragment Threshold, RTS Threshold, Beacon Interval, Data Rate, Preamble Type, and Broadcast
ESSID. You should not change these parameters unless you know what effect the changes will have
on WAP-1963A. When configuration finished, please click "Apply" to save the settings.
Parameters Description
There are two authentication types: "Open System" and "Shared Key". When you
Authentication Type
select "Open System", wireless stations can associate with this access point
without WEP encryption. When you select "Shared Key", you should also setup
WEP key in the "Encryption" page and wireless stations should use WEP
encryption in the authentication phase to associate with this access point. If you
select "Both", the wireless client can associate with this access point by using
any one of these two authentication types.
15