Dual-Band Wireless A+G Notebook Adapter
5. If you chose Infrastructure Mode, go to Step 6 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings
screen will appear.
Select the correct operating channel for your wireless network. The channel you choose should match the
channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep
the default setting, Auto.
Click the Next button. Click the Back button to change any settings.
Chapter 4: Setting up the Dual-Band Wireless A+G Notebook Adapter
Using the Setup Wizard
Figure 4-5: Setup Wizard's Ad-Hoc Mode Settings Screen
9