Parrot CK3100 Series Installation Manual page 12

CLASS A
4
7
9
Unscrew screws number 7, 8, 9
and 10 located on the top and
middle of the central console
cover. Then carefully disconnect it
and pass the cable behind in the
top right corner located near
screw 7
6
Glue the mounting (supplied) to
the top left of the central cover
after carefully degreasing the
surface
This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without
the authorisation of Parrot SA. Pictures for information only.
Fitting the hands-free system 3 / 3
8
10
ATTENTION: When reassembling,
be careful not to cut the wire and
rescrew screws 7, 8, 9 and 10
Then pass the cable to the left side
of the radio frame towards the air
conditioning housing
5
7
12