Parrot CK3100 Series Installation Manual page 10

For mercedes-benz class-a

Hide thumbs Also See for CK3100 Series:

CLASS A

For vehicles equipped with AUDIO 20 or 50: use the adapter 86111/PC000033AA

and the factory connector for CK (same mounting as AUDIO 5) or

84099/PC000033AA for MKI (for the PC000033AA add the factory connector and the

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in

compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible

the authorisation of Parrot SA. Pictures for information only.

Fitting the hands-free system 1 / 3

Connect the factory connector, invert the fuses

i.e. the RED and ORANGE wires, then cut the

RED wire between the fuse holder and the ISO

connector and connect the +APC wire above

same mounting as the AUDIO 5)

For the adapter 84099, remove the terminals

from the blue wire before the fuse holder, then

mount a round female terminal on the +APC

wire and connect it to the blue wire