Formatting the hard drive
Formatting initializes the hard drive to a format which can be used by TYPE S.
• Bear in mind that when the hard drive is formatted, all the existing data on that drive will be erased.
1
Switch to the USB HOST mode.
2
Connect the USB hard drive.
3
Press [MENU/MODE CHK].
4
Using
,
and
, select "HDD" –
"EXPLORE", and press
The HDD EXPLORE screen is opened.
5
Press [MENU/MODE CHK], select
"OPERATION" – "FORMAT (HDD)" using
and
, and press
6
Select "YES", and press
7
When the confirmation message appears
again, select "YES", and press
The hard drive is now formatted.
8
When the completion message has
appeared, press "OK" ( ).
.
,
.
.
.
57