Bosch DCN Next Generation Operation Manual page 105

Conference System
Figure 5.21: Example, block mounting (continued)
Notice!
Use a filling knife to remove flush-mounted devices from a surface.
Refer to the figure for the dimensions of a recess for the block-mounting method.
Figure 5.22: Recess, block-mounting method
The length (x) of a recess depends on the total number-size factor (NSF) of the flush-mounted
devices that must be installed in the recess. To calculate the length of a recess:
–
Bosch Security Systems B.V.
B
C
A
B
For each flush-mounted device, get the number-size factor (NSF).
TORX 8
A
05
07
TORX 8
09
Operation Manual
Installation | en 105
06
08
10
2013.11 | V2.0 | DCN-NG_OM_V4.x