Control Center Programming Items - Bosch ICP-EZM2 System Reference Manual

60 en | Programming
5.2.8

Control Center Programming Items

Speech Configuration Items
Programming Item
Alarm Message Minimum Repeat Time
"No Alarm Report Sent" Announcement
"Cancel Report Sent" Announcement
Time Format
Global Control Center Items
These programming items affect all control centers connected to the control panel.
To send a user fire, emergency (medical) or panic report, the appropriate control center
button and report must be enabled. Refer to Route Reporting Options, page 54 to enable
reports.
Check the appropriate box in the Easy Series User Guide (P/N: F01U025111B) to identify
which buttons are enabled.
Programming Item
Fire Button Alarm
Medical Button Alarm
Panic Button Alarm
One Button Arming
[i]
Invalid Passcode Attempt Limit
Control Center Lockout Time
Individual Control Center Items
Programming Item
Control Center
Brightness
2014.09 | 01 | F.01U.306.221
Item
Number
888
889
890
891
892
893
Item Number
Control Center 1: 811
Control Center 2: 821
Control Center 3: 831
Control Center 4: 841
System Reference Guide
Item Selections
Number
880 (1 to 255 hrs).
883 0 = Announcement disabled.
1 = Announcement enabled.
884
887 0 = Determined by voice module
1 = Always use 12-hr mode
2 = Always use 24-hr mode
Selections
0 = Disabled.
1 = Enabled.
0 = Disabled.
1 = Enabled
0 = Disabled.
1 = Enabled (audible).
2 = Enabled (silent).
0 = Disabled (token or passcode required).
1 = Enabled (token or passcode is not required).
3 to 8.
1 to 30 min.
Selections
1 (dim) to 5 (bright).
Easy Series Control Panel
Manuf.
Defaul
t
12
1
1
0
Manuf.
Defaul
t
0
0
0
0
3
3
Manuf. Default
Control Center 1: 5
Control Center 2: 5
Control Center 3: 5
Control Center 4: 5
Bosch Security Systems, Inc.