Panasonic KX-TD500 Installation Manual page 269

Item
Forced card reset
LED indication
Port status
Signaling Bit
Notes
• If the port type of PRI23 card is assigned to "EXT" by System Programming, the
detailed information cannot be displayed on this screen.
• "Signaling Bit" is displayed only when the LPR software version of the T1 card is
"Y311D" or later.
Installation Manual
Description
Echo back error (#1300)
LPR memory checksum error (#1306)
LPR Runaway (#1307)
Card start up error (#1308-#1312)
(Available for T1 card only)
ON/OFF/Flash/None (-): Status of LED indicator on the T1/
PRI23 card
Current status of the port
Status of signaling bit (Available for T1 card only)
Description
Utility
269