Average task duration: 5 minutes
6.2.1
Required tools
Preliminary and concluding steps: tool-less
●
Main steps: tool-less
●
6.2.2
Removing the dummy cover
Figure 45: Removing the dummy cover
Ê Push the handle of the dummy cover in the direction of the arrow (1).
Ê Swivel out the dummy cover (2) and remove it.
V
CAUTION!
Keep the dummy cover for future use. If the power supply module is
removed and not replaced with a new one, the dummy cover must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility), and to protect against fire.
CX400 S1
Upgrade and Maintenance Manual
Power supply
81