Removing The 3.5-Inch Hdd Sas / Sata Backplane - Fujitsu PRIMERGY CX400 S1 Upgrade And Maintenance Manual

Ê Remove all HDD modules as described in section
modules" on page
"Opening the server enclosure" on page 51
Ê
"Removing the power supply module" on page 84
Ê
Ê Remove both fan modules as described in section
module" on page
"Removing the power distribution module" on page 54
Ê
"Removing the midplane" on page 153
Ê
Ê Remove all linking boards as described in section
board" on page 167
7.4.2.3

Removing the 3.5-inch HDD SAS / SATA backplane

Figure 82: Removing the front panel cable from the cable clamps
Ê Remove both front panel cables from the cable clamps.
CX400 S1
115.
137.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
"Removing 3.5-inch HDD
"Removing the fan
"Removing the linking
127