4.6
Opening the server enclosure
V
CAUTION!
Before removing or installing covers, turn off the server nodes and all
●
peripheral devices. Also unplug all power cables from the outlet.
Failure to do so can cause electric shock.
For further safety information, please refer to chapter
●
information" on page
4.6.1
2.5-inch chassis
4.6.1.1
Removing the top cover 1
Removing the top cover 1 allows you to replace the power distribution board,
the midplane and the fans.
Figure 10: Removing the top cover 1 from the 2.5-inch chassis (A)
Ê Remove twelve screws from the top cover.
CX400 S1
31.
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
51