Panasonic WV-SW390 Series Operating Instructions Manual page 52

Wv-sw390/wv-sc380 series
Hide thumbs Also See for WV-SW390 Series:
Table of Contents

Advertisement

10 Configure the basic settings of the camera [Basic]
Note
Link indicator (orange): This indicator will light when communication with the connected device is
available.
Access indicator (green): This indicator will light when accessing a network.
Live indicator (Red/Orange/Green): The live indicator will light or blink as follows depending on the
camera status.
When the power is turned on
During standby or connection (Cable is not connected.)
During standby or connection (Cable is connected.)
During the upgrade process
During the initialization
Port forwarding error caused by the UPnP function
Trouble happening on the camera
Failure in writing data on the SDHC/SD memory card
[Alarm status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button, the [AUX] button or the SD
saving status indicator will be displayed to notify of the camera status.
Polling(30s): Updates the status each 30 seconds and provide notification of the camera status.
Real time: Provide notification of the camera status when the status has changed.
Default: Real time
Note
Depending on the network environment, notification may not be provided in real time.
[Alarm status reception port]
When selecting "Real time" for "Alarm status update mode", designate a port number to which the status change
notification is to be sent.
Available port number: 1 - 65535
Default: 31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Automatic installation of viewer software]
Determine whether or not to install the viewer software from this camera.
On: Installs the viewer software from the camera automatically.
Off: The viewer software cannot be installed from the camera.
Default: On
52
Operating Instructions
Operation status
Before the network
connection is established
When the network
connection is established
Indicator status
Blinks orange
Blinks orange ® Blinks green
® Lights green
Lights orange
Lights green
Blinks orange
Blinks orange ® Lights off
Blinks orange (in 2 seconds
intervals (on for 1 second / off
for 1 second))
Blinks red
Lights red

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents