Sharp IV-S30J User Manual page 116

Lead Inspection
Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-CALC" from
the popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 14: Numeric calculation."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND"
using the left and right arrow keys. Press the SET key to display the popup menu. Select "OUT"
from the popup menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 16: Set the Input/Output Conditions."
Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be displayed
6
on the screen.
Final evaluation result
Measuring time
Measurement program number
Registration number for the
measurement conditions
Number of leads
Distance between leads
(maximum/minimum in pixels)
Lead width
(maximum/minimum in pixels)
Lead length
(maximum/minimum in pixels)
Example when a straight line is selected as
measurement shape
(TYPE00)
OK
MEAS XXXXms
MEASUREMENT 1 INSPECT-LEAD
REGISTER N00(0~15)
K=005 OK
D=048.0 OK
046.0 OK
W=017.0OK
016.0OK
L=034.0 OK
032.0 OK
X0 Y0 7
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
6-8
F C1 DRK
V*.**
READY