27.
device-name#show monitor ram-usage
Period
Traps
Log
Limit value
Delta value
Notify on delta if criteria less than limit
8. To check RAM usage monitoring, the trap output can be routed to the console:
device-name#configure terminal
device-name(config)#log cli-console
device-name(config)#log-history nvram trap errors
Traps are displayed on the CLI console. Note that the RAM usage is checked at 5 second
intervals, as specified with the period command:
tHiSwMonitr: 1970/01/01 00:14:08
Kb(limit 124474Kb)
Related Commands
Table 27-9 shows the periodic monitoring related commands.
Table 27-9 Periodic Monitoring Related Commands
C o m m a n d
show cpu
utilization
MN700004 Rev 01
Periodic Monitoring
: 5 sec.
: Enabled
: Enabled
: 10Kb
: 3Kb
D e s c r i p t i o n
Displays the CPU usage in real time.
alerts: RAM Usage BIST fail: 134477
D e s c r i b e d i n
Status Monitoring, Statistics
and General Commands
328