Description Of Commands - Nokia ESB26 User Manual

17.

Description of Commands

Commands to Display the VLAN Configuration
Figure 17-1 summarizes the commands available for displaying the VLANs. You can use the
show command (with no arguments) in the general VLAN configuration mode or in a specific
VLAN configuration mode to display the VLAN configuration. The other commands
summarized in the table are available in Privileged (Enable) mode.
Table 17-1 Commands for displaying the VLANs
C o m m a n d
show
show vlan
show vlan dynamic
show vlan management
show vlan
The show vlan command, in Privileged (Enable) mode, displays information regarding the
VLANs defined in the system. The command is equivalent to the show command in VLAN
Configuration mode.
Command Syntax
device-name#show vlan
Example
device-name#show vlan
====================================================================
Name
--------------------+----+---------------------+--------------------
default
show
The show command, in Global and Specific VLAN Configuration modes, displays
information regarding the VLANs defined in the system. The command is equivalent to the
show vlan command in View and Privileged (Enable) mode.
Command Syntax
device-name(config vlan)#show
MN700004 Rev 01
Virtual LANs (VLANs)
D e s c r i p t i o n
Displays the VLAN configuration (this command is available in the
general VLAN configuration
configuration mode).
Displays the VLANs configuration.
Displays the dynamic VLANs.
Displays the management VLANs.
|VTag| Tagged ports
|1 |
197
mode and in any
| Untagged ports
|1/1/1-1/1/2
specific VLAN