Emergency Procedures; Card Functions And Locations; Front Panel; D6600 - Bosch Conettix D6600 Installation And Operation Manual

Conettix D6600/D6100i | Installation and Operation Guide | 2.0 Emergency Procedures

2.0 Emergency Procedures

Section17.0 Service Information on page 34 of this
guide contains a Service Information form. Keep this
form current and accessible to central station
personnel at all times in case of emergency.
If your D6600/D6100i becomes inoperable or
experiences trouble receiving signals:
1. Notify your supervisor.
2. Refer to Section 15.0 Troubleshooting Guide on
page 29.
3. Contact Bosch Security Systems, Inc. at
(800) 289-0096 for assistance if you have a
receiver spares package and need to replace a
circuit card or module.
The AC/DC Power Supply Module and
DC/DC Power Supply Module for the
D6600 are not field serviceable. Contact
Bosch Security Systems, Inc. for
service.
Disconnect power to the receiver before
removing the CPU or CPU terminator
card.
Before Calling
1. Have this guide nearby and opened to Section
15.0 Troubleshooting Guide on page 29.
2. Have your spares package, the D6200
Programming Software, and the D6600/D6100i
Program Entry Guide (P/N: 4998122702) nearby.
3. Know the location of the telephone line jacks for
the receiver.
4. Know the telephone numbers to the receiver's
telephone line cards.
5. Know the exact nature of the problem you are
experiencing such as reports received, LEDs lit,
or Operator Alert Buzzer sounded.
6. Have the service information form nearby
(page 34).
4
3.0 Card Functions and
Locations
3.1

D6600

3.1.1

Front Panel

Figure 1: D6600 Communications
Receiver/Gateway (Front View)
1
1 – LCD - Shows up to 80 characters of
information (two lines of up to 40 characters
each)
2 – Keypad - The D6600 has a 20-button keypad.
Table 2 and Table 3 on page 5 show and define the
D6600/D6100i POWER and SYSTEM TROUBLE
LEDs.
Bosch Security Systems, Inc. | 6/09 | 4998122704-06
2